Name
|
Description
|
AttachedSensors
|
An array of Sensor objects attached to the TDRS Transponder to act as antennas for measurement modeling purposes. The Sensor's X, Y, and Z position properties will be used to model an offset from the origin of the Spacecraft BCS when modeling measurements.
|
DeclaredName
|
The name of the object as declared.
|
DisplayName
|
The name displayed for this object in output windows such as views, plots, and reports.
|
FrequencyBandID
|
The frequency band ID of the user Spacecraft in a TDRS/user link. This property is not currently used.
|
ObjectId
|
The unique identifier for the object.
|
ObjectType
|
The type of the object.
|
OD
|
This property contains the OD settings for all the TDRSTransponder properties that can be estimated.
|
ReceiveFrequency
|
Frequency at which the Transponder receives data.
|
ReturnLinkID
|
The return link ID from the user Spacecraft to the TDRS in a TDRS/user link. This property is not currently used.
|
ServiceConfiguration
|
The service configuration ID for TDRS transmission link. This property is not currently used.
|
SMAReturnFrequencyId
|
Space-Ground Link (SGL) S-Band Multiple Access Return (SMAR) Downlink Frequency ID. This is used to compute the pilot tone frequency translation for TDRS I/J/K multi access services.
|
TrackerType
|
The tracker type for services.
|
TranslationFrequency
|
Multi-Access reference frequency for return doppler tracking. Note that this is different than the pilot tone frequency translation on the TDRSObservation and BRTSObservation, as it only pertains to the multi-access service.
|
TransmitFrequency
|
Frequency at which the Transponder transmits data. Note that this maps to the user or remote terminal transmit frequency and ultimately maps to the UserTransmitFrequency on the TDRSObservation or the BRTSTransmitFrequency on the BRTSObservation.
|
UseKuBand
|
A flag indicating whether or not to use the Ku-Band frequency. The antenna and frequency band flags are used to determine the Pilot Tone Frequency Translation for the return link.
|
UseMultipleAccess
|
A flag indicating whether or not to use the Multiple Access antennas. The antenna and frequency band flags are used to determine the Pilot Tone Frequency Translation for the return link.
|
UseSBand
|
A flag indicating whether or not to use the S-Band frequency. The antenna and frequency band flags are used to determine the Pilot Tone Frequency Translation for the return link.
|
UseSingleAccess1
|
A flag indicating whether or not to use the primary Single Access antenna. The antenna and frequency band flags are used to determine the Pilot Tone Frequency Translation for the return link.
|
UseSingleAccess2
|
A flag indicating whether or not to use the secondary Single Access antenna. The antenna and frequency band flags are used to determine the Pilot Tone Frequency Translation for the return link.
|